EPEVER TRIRON 10A or 20A or 30A or 40A MPPT Solar Charge Controller LCD Dual USB RS485
TRIRON2210N 20A Max PV Voltage 100V
TRIRON3210N 30A Max PV Voltage 100V
TRIRON4210N 40A Max PV Voltage 100V
Brief Description
The TRIRON series controllers are modular-designed products based on nine
MPPT solar controller models. The main unit (Power Module) is
a solar controller which can be integrated with different display and
interface modules to meet a variety of functional requirements. Among them,
the master and slave interface module can synchronize and view the controller and inverter operating data on the LCD.
Features
Self-identifying, load the driver for each module
Modular design, varied combination to meet different requirements
Support the hot swapping function (only for same model)
Advanced MPPT control algorithm to minimize the MPP loss rate and loss time
Ultra-fast tracking speed, and high tracking efficiency ≥99.5%
Accurately tracking and recognizing of multiple MPP
Peak conversion efficiency of 98%
Auto limit function of charging power and charging current.
Compatible with lead-acid batteries and lithium batteries
Wide MPP operating voltage range
Full load operation during the working temperature range
Auto reduce power function when charging in high temperature
Multiple load work modes
Battery temperature compensation
Real-time power statistics recording function
Multiple LCD and LED display modules optional
Master-slave interface module design,simultaneously view the controller and inverter operating data
Dry contact design, remotely switch on/off external equipment
Dual USB design, supply DC power for electronic equipment
Perfect electronic protection function
Protection function
PV over current protection
PV short circuit protection
Lithium battery low temperature protection
Night reverse charging protection
Battery reverse polarity protection
PV reverse polarity protection
Battery over discharge protection
Battery over heat protection
Battery over voltage protection
Load short circuit protection
Load overload protection
Controller overheating protection
Specification



Module introduction
Display module includes base (DB1), standard 1(DS1) and standard 2(DS2);
Interface module includes UCOMS(UCS), RCOMS (RCS), RCOMM(RCM) and dual USB(USB1).




NOTE: CCV module is an empty board module, does not contain any communication interface.
RCM module can only connect to our company inverter, it can not connect to other accessories.
Module application

Accessories
NOTE: When the interface module is RCS or UCS, the above accessories can be used with the controller.