On Grid Tie Inverter 600W 15-60VDC Input 110V/220VAC Output with MPPT Function 99% Efficiency Pure Sine Wave for Solar Energy Systems

Better Price,Exactly Shipping Fee,Questions,please mail to me: info@ysolartech.com
OR Call Directly (Whatsapp, Wechat,Skype):+86 18676677986 to get quick reply. 

On Grid Tie Inverter 600W 15-60VDC Input 110V/220VAC Output with MPPT Function 99% Efficiency Pure Sine Wave for Solar Energy Systems

It`s 15-60VDC ,suitable for 24V/36V 60Cells/72Cells solar panels.

Brief Introduction

Smart Grid Tie inverter is a compact unit,which directly converts direct current into alternating current for powering appliances and/or office equipments and connecting to utility grid.The AC output from Smart Micro inverter is synchronized and in-phase with the utility grid.It is a key device of power generation systems such as PV power generation system.

Smart Micro inverter specially optimized design to work with modularization of DC power supplies which includes the mainstream solar modules,18V(36cells),24V(60 cells) and 36V (72cells) Moncrystal and/or polycrystalline solar panels and batteries.Smart Micro inverters are stabliation,reliable and high conversion efficiency items.It is the best choice for PV power generation system.

Features

 Wide voltage input(15-60VDC)
Achieve wide voltage input.
DC voltage input 15-60VDC
Second level power variable voltage conversion

Kinds of frequency output function.
It can apply to 50Hz and 60Hz frequency of AC.
Frequency range: 45Hz ~ 63Hz

AC 0 angle with high precision auto-detection
AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.

Synchronous High-frequency Modulation
1 Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz)
2 Synthetic way: MOSFET full-bridge
3 High frequency: 38KHz

Pure Sine Wave Output
Use SPWM directly to make pure sine wave output.
1 Output waveform: Adopt complementary PWM to push-pull pure sine wave.
2 Generate means: enhancement-mode SPWM

Power Automatically Locked (APL)
In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the
maximum power point, the product automatically powers locked in maximum power point, then made the
output power more stable.

Power lock: The biggest sampling point of MPPT.

Automatically Adapt To Different Load Power
The output synchronise with the electrical utility Grid. With a strong back of power grid, any power load can work, such as: Inductive Load; Resistance Load; Condensive Load

Constant Current, Constant Power, Current-limit Protection
The output synchronise with the Power Grid and power phase, and tie to the Power Grid; take the Power Grid as a supplement,make the output current and power are constant,not affect by load, without any overload, over-current phenomenon.

Automatically Shut Down When The Power Output Of a Fault
When the city power system is in failure, the inverter will automatically turn off the output.

Stack Multiple Machines
Multiple small power inverters in parallel can achieve large output power.

High-Frequency High Conversion Rate
Adapt high frequency converter, the output more efficient.

Maximum Power Point Tracking (MPPT) Use battery as power supply, this function is not exist.
Current intensity, voltage constantly changes, if there is no power point tracking, then there will be a lot of problems in the past usually adopted a solar controller, this product uses high_precision MPPT
computing power, automatic and immediate to solar panels output power adjustment in the maximum output point, in order to achieve a stable output purposes.

Specification 

Package

Instrallation

Installation
1. Red terminal: Connect DC positive, black terminal: Connect DC negative. Shown in Figure 1.
2. AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home
3PIN AC outlet. Are shown in Figure 2.
3. Switch: properly connected; turn on the switch, the inverter to work

LED indicator

1. Red LED indicator lights up under any conditions as listed below:
a. Low-voltage protection(DC input voltage lower than Min. input voltage of inverters )
b. Over-voltage protection(DC input voltage higher than Max. input voltage of inverters)
c. Over-temperature protection (inverters will be shut down for power output when the temperature of body of inverters higher than 65-75℃.)

And inverter will be automatically restart up when the temperature of body of the inverter down to 40-50℃.

d. Power grid fault protection (when 110VAC or 220VAC grid power outage and/or tripped.
e. Islanding protection: inverter will be automatically shut down for power output when disconnect with power grid.

Warranty

Warranty Conditions

Warranty Period: 15-year limited warranty period.

Warranty Time Start: From the date of bill of lading

Warranty Evidence: The B/L, Product(s) series number(s), Product(s) model, and a completed warranty card.

If your device has a defect or malfunction during the warranty period, please contact your retailer or installer. 

 Product Image